Britax FRONTIER 90 Guide de l'utilisateur télécharger pdf (Page 7)

10 11

LATCH with CLICKTIGHT

Before you begin:

• Check that your vehicle has lower anchors.

* Use the vehicle belt (not lower connectors) for harness

mode installations with children who weigh more than 40

lbs (18.1 kg).

• Check that your vehicle has a top tether anchor.

* The top tether MUST be used in harness mode for

children that weigh more than 65 lbs (29.5 kg). Britax

recommends that the top tether be used at all times

when installing the child seat. Using the top tether will

improve the stability of your child seat and reduce the

risk of injury. Check your vehicle owner’s manual for

tether anchor locations.

• Loosen the Versa-Tether and place it over the child seat

back to keep it from becoming pinned between the child

seat and vehicle seat during installation.

• Adjust the child seat to desired position and place forward

facing on the vehicle seat.

Checklist

9 Check all connections and verify that child seat is secure.

* The child seat is secure when it cannot be moved front-to-

back or side-to-side more than 1 in. (2.5 cm) at the belt path.

If the child seat is not secure, repeat the installation procedure

or use a different seating location.

9 Check that any excess Versa-Tether webbing is contained

within your vehicle and secured in the elastic strap.

1 Release the buckle and open

the CLICKTIGHT to access the

lower connectors.

* Locate the two slots in the

CLICKTIGHT cover.

* Squeeze the CLICKTIGHT

release levers.

2 Route the lower connector

strap along the green belt path

and firmly press the lower

connectors onto their adjacent

lower anchors.

* A click confirms attachment.

* Verify that the strap is not

twisted.

Pull the end of the lower

connector strap to remove

slack.

4 Close the CLICKTIGHT.

* A click confirms the

CLICKTIGHT is secure.

* The child seat is secure when

it cannot be moved front-to-

back or side-to-side more

than 1 in. (2.5 cm) at the belt

path. If the child seat is not

secure, repeat the installation

procedure or use a different

seating location.

Firmly press the Versa-Tether

hook over a designated

vehicle tether anchor. Remove

slack.

6 Secure excess webbing with

the elastic strap.

Installing the Child Seat: Harness Mode Installing the Child Seat: Harness Mode

1 2 3 4 5 6 7 8 9 10 11 12 ... 50 51

Commentaires sur ces manuels

Pas de commentaire

Britax FRONTIER 90 Guide de l'utilisateur Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Siège de voiture Britax FRONTIER 90