Britax FRONTIER 90 Guide de l'utilisateur télécharger pdf (Page 8)

12 13

Lap Belt with CLICKTIGHT

Before you begin:

• Check that your vehicle has a seat belt that can be locked.

* Check your vehicle owner’s manual to determine what

type of vehicle belt you have and how it can be locked

for use with child seats.

• Check that your vehicle has a top tether anchor.

* The top tether MUST be used in harness mode for

children that weigh more than 65 lbs (29.5 kg). Britax

recommends that the top tether be used at all times

when installing the child seat. Using the top tether will

improve the stability of your child seat and reduce the

risk of injury. Check your vehicle owner’s manual for

tether anchor locations.

• Loosen the Versa-Tether and place it over the child seat

back to keep it from becoming pinned between the child

seat and vehicle seat during installation.

• Adjust the child seat to desired position and place forward

facing on the vehicle seat.

Checklist

9 Check all connections and verify that child seat is secure.

* The child seat is secure when it cannot be moved front-to-

back or side-to-side more than 1 in. (2.5 cm) at the belt path.

If the child seat is not secure, repeat the installation procedure

or use a different seating location.

9 Check that any excess Versa-Tether webbing is contained

within your vehicle and secured in the elastic strap.

1 Release the buckle and open

the CLICKTIGHT.

* Locate the two slots in the

CLICKTIGHT cover.

* Squeeze the CLICKTIGHT

release levers.

2 Pull the vehicle belt out and

route along the green belt

path. Verify that the belt is not

twisted and then buckle.

3 Lock and remove slack from

the vehicle belt.

4 Close the CLICKTIGHT.

* A click confirms the

CLICKTIGHT is secure.

* The child seat is secure when

it cannot be moved front-to-

back or side-to-side more than

1 in. (2.5 cm) at the belt path.

If the child seat is not secure,

repeat the installation procedure

or use a different seating

location.

5 Firmly press the Versa-Tether

hook over a designated

vehicle tether anchor. Remove

slack.

6 Secure excess webbing with

the elastic strap

Installing the Child Seat: Harness Mode Installing the Child Seat: Harness Mode

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 50 51

Commentaires sur ces manuels

Pas de commentaire

Britax FRONTIER 90 Guide de l'utilisateur Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Siège de voiture Britax FRONTIER 90