Britax FRONTIER 90 Guide de l'utilisateur Page 14

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 51
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 13
24 25
Insert one tongue at a time into
the buckle.
NOTE: Proper connection is
confirmed with an audible click
after inserting each buckle
tongue.
Fastening the Buckle Releasing the Buckle
Press the release button and
pull the tongues from the
buckle.
NOTE: Periodically clean
the buckle to ensure proper
operation. See Page 44.
Using the Chest Clip
1 Squeeze to
open
1 Push together to fasten
NOTE: Always position the chest clip at
armpit level.
Using the Recline
IMPORTANT: This child seat cannot be in the recline position when
used in booster mode.
1 Pull the recline adjustment
handle and adjust the seat to
the desired position.
* Adjust the seat and ensure that
it is locked into the desired
position before installing in the
vehicle.
* Ensure the top of the child seat
does not rest against the
top of the vehicle seat back
while reclining.
* Pay attention while adjusting
the recline to keep hands clear
of any pinch point.
2 Upright Position
3 Recline Position
Using Lower Anchors and Tethers for Children (LATCH)
LATCH SYSTEM ANCHOR LOCATIONS
Tether
Anchor
Lower
Anchors
The figure above shows typical locations for lower anchors and
tether anchors in a vehicle. Check your vehicle owner’s manual for
the exact lower anchor locations and seating positions (if equipped),
information on use with a child seat, and for the maximum weight
rating for the lower anchors.
Standard vehicle seat spacing between lower anchors is 11 inches
(27.9 cm). This child seat can be used in a seating position with up
to 20 inches (50.8 cm) of space between the lower anchors if the
vehicle manufacturer allows.
Child Seat Functions Child Seat Functions
Vue de la page 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 50 51

Commentaires sur ces manuels

Pas de commentaire