Britax Maxi Rider Manuel du propriétaire Page 24

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 37
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 23
Instructions for Installation & Use - Series No. 8100/A/2010Instructions for Installation & Use - Series No. 8100/A/2010
HOW TO INSTALL WITH A CHILD HARNESS
46 47
HOW TO INSTALL WITH A CHILD HARNESS
B. The two straps should slide freely in the Gated Slide slot.
B
A. Hold the lap and sash straps together and fold as shown below. Slide
the inner strap into the Gated Slide followed by the outer strap.
Faces
towards
Child
Inner
Strap
Outer
Strap
A
There may be one of two types of Gated Slides available as shown
below provided with the Child Harness. Only use the Gated Slide
provided with the Child Harness. If curved Gated Slide, then the belt
route through this can only go one way as shown.
Before using the Protecta PLUS™ Harness with a Lap-Sash Seat
Belt, you need to convert the seat belt to a Lap Seat Belt by using
the Gated Slide provided.
IMPORTANT: Face the hollow side of the Gated Slide towards the
child. Do not use Gated Slide for any other purpose.
USING LAP-SASH SEAT BELT WITH BOOSTER SEAT & CHILD HARNESS
Always ensure the Hollow
side is towards child
CurvedFlat
CHILD USE
(BOOSTER SEAT MODE WITH CHILD HARNESS)
CHILD USE
(BOOSTER SEAT MODE WITH CHILD HARNESS)
D. Feed the straps through the Gated Slide to remove any slack. This
has now converted the lap-sash seat belt so it will act like a lap
only seat belt.
TO ENSURE CORRECT CONVERSION OF LAP-SASH SEAT BELT
TO LAP SEAT BELT FOLLOW THESE STEPS.
Hollow side
towards child.
D
Strap
portion
Lap portion
Loop on top
Hollow side towards the child
C. Repeat previous step A for the other slot in the Gated Slide.
C
The Gated Slide must be removed from the seat belt if the booster seat and child harness are
no longer used in the car so that other users can use the seat belt as a lap sash seat belt.
A seat belt extender should not be used if the seat belt is not long enough to secure the
child. If a seat belt extender is used then the buckle must not be in contact with the child.
IMPORTANT:
Vue de la page 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 36 37

Commentaires sur ces manuels

Pas de commentaire