Britax Maxi Rider Manuel du propriétaire télécharger pdf (Page 12)

Instructions for Installation & Use - Series No. 8100/A/2010Instructions for Installation & Use - Series No. 8100/A/2010

TO REMOVE TODDLER FROM RESTRAINT

A. Press the red button on Harness Buckle then both

Harness Tongues will be released. Move each shoulder

strap to the toddler's side, then remove the toddler.

TO REMOVE RESTRAINT FROM

VEHICLE

A. Disengage seat belt tongue from buckle and

remove from restraint.

B. Fully press Upper Anchorage Strap Adjuster

Button (A) while pulling Upper Anchorage Strap

(B) to slacken as shown right. In some vehicles

loosening of the Upper Anchorage Strap may

be difcult. If so, try pushing the restraint

against the vehicle seat back or slightly lifting

the restraint to release the tension.

C. Disengage Attachment Clip from the Car's

Anchor Fitting. The child restraint is now

disconnected and can be removed from the car.

HOW TO INSTALL

HOW TO USE

22 23

Roll up excess strap

and store with the

storage band to

avoid tripping when

moving the restraint.

Fully press Adjuster Button (A) while pulling

Upper Anchorage Strap (B) to lengthen.

Storage

Band

TODDLER USE

(WITH IN-BUILT HARNESS)

TODDLER USE

(WITH IN-BUILT HARNESS)

PLACING TODDLER IN THE

RESTRAINT

A. Lengthen harness by pressing Harness

Adjustment button while pulling on either

shoulder strap until the harness will

accommodate the child.

B. Place child in the restraint and feed each arm

through shoulder straps. Pull harness buckle

up between child's legs.

Engage the buckle tongues and tighten the

harness as described on the next page.

Pull harness

adjuster

strap to

tighten.

Pull to

lengthen

Press and hold

B C

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 36 37

Commentaires sur ces manuels

Pas de commentaire

Britax Maxi Rider Manuel du propriétaire Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Siège de voiture Britax Maxi Rider