Britax ROUNDABOUT 55 Guide de l'utilisateur télécharger pdf (Page 34)

64 65

Tips and TroubleshootingCare and Maintenance

Re-thread the Buckle

1 Guide the buckle retainer

down through the slot in the

child seat shell.

2 Slide the buckle webbing

into the slot between buckle

positions.

Troubleshooting

Problem: The harness is hard to adjust.

Possible Solution: The yoke may be caught on the Versa-Tether

webbing or other component of the child seat. Remove the obstruction

and try adjusting the harness again. Always store the Versa-Tether in

the pouch provided when not in use. When the Versa-Tether is in use,

always secure excess webbing in the elastic strap. See pages 26 – 27.

Problem: The adjuster strap is fraying at the sides.

Possible Solution: Pull the harness adjuster strap away from the child

seat (parallel to the ground) to tighten. Do not pull sideways. Doing so

may cause the harness adjuster strap to fray at the sides. See page 57.

Problem: The buckle will not fasten with a click after each tongue

is inserted.

Possible solution: There may be debris in the buckle mechanism.

Clean the buckle as shown on page 63 and try fastening the buckle

again.

Please contact Consumer Services at 1.888.427.4829 if you have an

issue not listed here.

3 Select the appropriate slot for

the size of your child and turn

the buckle webbing and slide

it into the chosen slot.

4 Ensure that the buckle strap

is not twisted and that the

button faces out.

IMPORTANT:

• ALWAYS position the buckle in the

inner slot for rear-facing use.

• The vehicle belt must pass in front of the

buckle strap for rear-facing use.

• NEVER leave the buckle in the

adjustment slot.

• Use the outer buckle slot when installing the child seat forward-

facing with a child weighing 30 lbs (13.6 kg) and above or if the

buckle is under the child in the inner position.

ADJUSTMENT

SLOT

1 2 ... 29 30 31 32 33 34 35 36

Commentaires sur ces manuels

Pas de commentaire

Britax ROUNDABOUT 55 Guide de l'utilisateur Page 34

Commentaires sur ces manuels