Britax MARATHON Guide de l'utilisateur télécharger pdf (Page 21)

38 39

Care and MaintenanceCare and Maintenance

Cleaning the Buckle

If your child eats and drinks while in the child seat, you will need

to check the buckle periodically and rinse out any accumulated

debris.

Removing the Buckle

To Clean:

• THOROUGHLY RINSE the buckle using warm water.

• TEST THE BUCKLE by fastening and unfastening until a click is heard

after inserting each buckle tongue. If clicks are not heard, repeat the

cleaning procedure.

• TOWEL DRY

• DO NOT:

* Soak

* Lubricate

* Use solvents

* Use soap or household detergents

Replacing the Buckle

IMPORTANT:

• ALWAYS position the buckle in the

inner slot for rear-facing use when

using a vehicle seat belt installation.

• The vehicle belt must pass in front

of the buckle strap for rear-facing

use.

• Position the buckle in the slot

closest to but not under the child for rear-facing use when using the

LATCH installation.

• NEVER leave the buckle in the adjustment slot.

• Use the outer buckle slot when installing the child seat forward-facing

with a child weighing 30 lbs (13.6 kg) and above or if the buckle is

under the child in the inner position.

ADJUSTMENT

SLOT

1 Remove the belly pad and

buckle.

Lift the cover from the seat to find

the buckle strap connection.

b Remove the buckle strap by

turning the buckle retainer

sideways and routing it out of the

front buckle slot in the child seat.

c Slide the end of the belly pad out

from under the foam pad on the

seat.

d Pull the end of the belly pad

and buckle retainer out of the

slot in the cover to remove.

e Turn the buckle retainer

sideways and route the

buckle assembly out of the

belly pad.

d Turn the buckle retainer

sideways and route it through

the front buckle slot and then

into the desired buckle position.

* Ensure that the buckle is in the

correct buckle position.

e Replace the cover.

Replace the belly pad and

buckle:

a Turn the buckle retainer sideways

and route it through the fabric

strip on the belly pad.

b Route the belly pad and buckle

retainer through buckle slot in

the cover.

* Ensure that the buckle is through

the correct cover slot for the buckle

position.

c Slide the end of the belly pad

under the comfort foam on the

child seat.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 44 45

Commentaires sur ces manuels

Pas de commentaire

Britax MARATHON Guide de l'utilisateur Page 21

Commentaires sur ces manuels

Produits connexes et manuels pour Siège de voiture Britax MARATHON